Getting close. Carbs now installed with linkage.
The motor is ready to install into the bus. Notice the SS heater hoses. Best investment in heater hose I ever made.
This motor is a 1915cc with dual 40mm Delorto Carburetors. Heads are 040 with mild p&p with 40x35.5 SS valves with HD springs. Case and heads were done by Headflow Masters. The cam is a Engle 100. Crank is a CW 69mm. Distributor is a 019 refurbished by Glenn Ring. CR is 8.2 to 1.
No comments:
Post a Comment